Pump Repair and Replacement in Southlake, TX: Well Water, City Water, and When a Booster Pump Helps

Just moved into your Southlake home and not sure what feeds your taps? A few quick checks give you the answer.

Signs you have city water:

• You get a monthly water bill.
• A meter box sits near the curb.

Signs you have a well:

• A wellhead or pipe casing sticks up in the yard.
• A pressure tank and switch sit inside, often in the garage.
• You get no water bill.

Most homes here use city water. The City of Southlake Water Utility Division buys treated water from Fort Worth. Some older acreage properties still run private wells.

Homeowners in Timarron and across Southlake often call us about weak upstairs showers. Before you buy a pump, a gauge test shows what's really going on. Watch for these signs first:

• Pressure drops when your sprinklers run.
• Tubs and sinks on upper floors fill slowly.
• Faucets at the far end of the house have weak flow.

We test your pressure at an outdoor hose bib at different times of day. That shows when your pressure dips and by how much. The city's water system runs on two pressure zones, so pressure can vary from one area to the next.

Not every pump does the same job. Knowing which one you need keeps you from paying for the wrong fix in your Southlake home.

• Booster pump: Adds pressure to the city water already coming into your home.
• Well pump: Pulls water up from the ground and feeds a pressure tank.

Low pressure isn't always a pump problem. A failing pressure-reducing valve or a hidden leak can cause it too, so we check those first. Large two-story homes with many baths often need extra pressure to reach the upstairs showers.

Once you know you need a pump, where it goes matters. For Southlake homeowners, we pick a dry, easy-to-reach spot near the main water line. That's often the garage or a utility area.

A pump needs its own power supply. Our electricians can add a dedicated circuit during the same visit, so you don’t need a second contractor. Code governs how that circuit is sized and protected. Before we arrive, you can help:

• Clear space near the main water line.
• Check your HOA rules if any equipment will sit outdoors.

Summer heat builds up fast in garages here. We leave room around the pump for airflow so it doesn't run hot.

A pump that's too small leaves you with weak showers, and one too big wears out early. For homes in Carillon and across Southlake, we size each pump to how your family uses water. Before we choose, we count:

• Bathrooms
• Fixtures
• Irrigation zones

After the install, we run several fixtures at once and check the pressure gauge. You get steady pressure in every shower, even during peak use. Summer irrigation is when pumps here work hardest, so we test with that load in mind.

Not sure if you need a booster pump or well pump service? Book a pressure test, and we'll find the cause of your weak water flow.

We've been Southlake's original plumbers since 1975. We answer calls 24/7, so reach out whenever you're ready to schedule.

Call (817) 481-5869 for pump repair and replacement in Southlake.