Outdoor Lighting Installation in Fort Worth, TX: Low-Voltage or Line-Voltage for Your Yard?
Our long summer evenings are made for time outside, but dark paths and shadowy corners cut that time short. Good outdoor lighting lets you see where you’re walking and shows off your home after sunset. We provide outdoor lighting installation in Fort Worth, TX. Our team brings 50 years of Berkeys expertise and holds a 4.8-star Google rating.
This page explains how low-voltage and line-voltage lighting differ and which jobs each one fits. You’ll also see how we install and aim every fixture. For full service details, visit our outdoor lighting installation in Fort Worth, TX.
Many yards work best with a mix of both. Our licensed electricians plan a layout that lights your paths, trees, and entries the right way. Call Berkeys Plumbing, A/C & Electrical Today to book an outdoor lighting consultation.
Low-Voltage or Line-Voltage Landscape Lighting: Which Do I Need?
Low-voltage lighting runs on 12 volts through a transformer, and line-voltage lighting runs on standard 120-volt household power. Most Fort Worth yards use low-voltage for accents and line-voltage for bright security light.
Low-voltage: Fits paths, garden beds, and tree uplights. It’s easy to move and adjust.
Line-voltage: Fits driveways, entries, and security floodlights. It’s brighter and hardwired.
Both: Many yards use a mix, with a licensed electrician handling the line-voltage work.
Dark Walkways, Shadowy Corners, and Dim Porches Show Where You Need Light
Spend summer evenings outside in Fort Worth? Take note of the spots that go dark after sunset.
Steps and walkways you can’t see at night
A dark driveway or side yard
A front door that’s hard for guests to find
Trees and garden beds that disappear after dark
Spotting these dark zones helps us plan where each light should go. Many Fairmount bungalows have deep front porches, and those entries often need better lighting.
Low-Voltage Accents Paths and Trees; Line-Voltage Floods Driveways and Entries
Choosing a lighting system for your Fort Worth yard? Each type is built for a different job.
Low-voltage:
Powers path lights, uplights, and garden bed lights
Uses thin cable buried shallow in the ground
Is easy to move later if your landscape changes
Line-voltage:
Powers floodlights, post lights, and wall lights
Gives off brighter light
Runs its wiring through protected conduit
Matching the system to the space lights each part of your yard the right way. In Tanglewood, mature oaks are a popular spot for low-voltage uplights.
Walk Your Yard at Night and Mark Utility Lines Before Any Digging
A little prep keeps install day safe and on schedule at your Fort Worth home.
Walk your yard after dark and note the dark spots.
Mark your sprinkler heads and lines.
Check your HOA’s rules on outdoor lighting.
Clear the beds where fixtures will go.
Before anyone digs a trench, underground utility lines get marked through 811. Texas law calls for that 811 call before digging. The Railroad Commission of Texas reminder to call 811 before digging explains why it matters on your property.
We Set the Transformer or Run Hardwired Circuits With Weather-Rated Parts
Once your yard is ready, our Fort Worth electricians install the system you chose.
We mount the low-voltage transformer on a GFCI-protected outdoor outlet.
We run line-voltage circuits through conduit.
We install weather-rated fixtures and junction boxes.
We add timers or photocells so lights turn on at dusk.
The result is lighting that holds up through storms and summer heat. North Texas clay soil shifts as it swells and shrinks with wet and dry seasons. We plan cable runs to allow for that movement.
A Nighttime Walk-Through Lets You Adjust Every Beam Before We Leave
You should see the finished look before we pack up. After dark, we walk your Fort Worth yard with you.
We turn on every lighting zone.
We aim each fixture where you want it.
We check for glare into your windows or your neighbors’ yards.
We set your timer schedule.
That way, every beam lands where it should on the first night. We bring the same walk-through to Arlington homes, which we also serve from our Fort Worth location.
Seasonal Fixture Checks and Timer Updates Keep Your Yard Lit Year-Round
A few simple habits keep your Fort Worth outdoor lights working every night.
Reset your timers when daylight saving time changes.
Clear mulch and leaves off fixtures.
Trim plants that block the beams.
Check the lenses after storms.
Call us if a lighting zone goes dark.
These quick checks keep your yard lit through every season. In Arlington Heights gardens, fast spring growth can bury path lights in just a few weeks. A quick trim keeps them shining.
We're There When You Need Us!
877-746-6855 
Frequently Asked Questions
Low-voltage suits paths and accents, line-voltage suits bright security light, and many yards use both. We help you plan the right mix for your yard.
Not always, but the transformer needs a proper outdoor outlet. We handle the full setup, from the outlet to the last fixture.
It may, because it adds new hardwired circuits. We confirm what your project needs before work starts.
Yes. Timers or photocells turn your lights on at dusk, so you don’t have to remember.
Often yes, if your transformer or circuit has room for more fixtures. We check the capacity before adding new lights.
Call (817) 799-6090 for Outdoor Lighting Installation in Fort Worth
Ready to light up your paths, trees, and entry? Book an outdoor lighting consultation, and our licensed electricians will help you choose low-voltage, line-voltage, or a mix of both. Our customer service team is available 24/7, so call whenever you’re ready to get started.
Berkeys Plumbing, A/C & Electrical in Frisco • 4645 Avon Ln Suite 260, Frisco, TX 75033 • 214-216-1727