Home Rewiring Services in Fort Worth, TX: How to Tell If Your Home Has Aluminum Wiring
Aluminum wiring hides behind the walls of many older homes. You can’t see it, but the risk is real at every outlet and switch. Our home rewiring services in Fort Worth start by confirming what’s in your walls. Then we fix the risk where it lives, at the connections.
We’ve been serving DFW since 1975, with a Fort Worth office on West 5th Street. Our state-licensed electricians are background-checked before they come to your home. We pull the city permit and schedule every inspection, so the paperwork is handled for you.
On this page, you’ll learn which build years are most likely to have aluminum wiring. You’ll see how to spot the cable markings and which warning signs mean call now. We also cover your fix options, how we do the work, and the records insurers ask about. Call Berkeys Plumbing, A/C & Electrical Today.
How Can You Tell If Your Home Has Aluminum Wiring Before Booking Home Rewiring Services in Fort Worth?
Check the year your home was built.
Focus on homes built from the mid-1960s to the mid-1970s.
Look at exposed cable in the attic or garage for “AL” or “ALUMINUM” printed on it.
Check your home inspection report for aluminum branch wiring.
Watch for warm cover plates, flickering lights, or burning smells.
Don’t open outlets or the panel cover yourself.
Book an electrician to confirm and recommend a fix.
Homes Built From the Mid-1960s to the Mid-1970s Are the Most Likely Suspects
Own a Fort Worth home built between the mid-1960s and the mid-1970s? That’s the window when aluminum wiring was most common. Copper prices spiked in those years. Many builders switched to aluminum for the circuits that feed outlets and switches.
Homes built before 1965 are unlikely to have it. But an older home can still have aluminum in an addition or a circuit rewired during that era.
Many homes in Candleridge were built during those years. If yours is one of them, it’s worth a closer look.
The Print on the Cable Jacket Gives It Away
Want to check on your own? You can do it safely without opening a single outlet.
Look at exposed cable in your attic, garage, or other unfinished spaces. Aluminum cable has “AL” or “ALUMINUM” printed every few feet on its outer jacket.
Don’t worry about thick aluminum wires feeding your panel, AC, or range. Those are a different, normal type and aren’t the same risk.
Fort Worth attics run very hot in summer. Check early in the morning, before the heat builds.
Warm Cover Plates and Flickering Lights Mean Call Now
Noticing any of these in your Fort Worth home? Each one is a sign to call now:
Outlet or switch plates that feel warm
Lights that flicker
A burning smell near an outlet or switch
Outlets that stop working
Stop using that outlet and turn off its breaker. Then give us a call.
The risk sits at the connections. Aluminum can loosen there over time and overheat. Heavy summer AC use puts the most strain on those aging connections.
Full Rewiring and Approved Connector Repairs Both Fix the Hazard
Whether you live in Overton Park or anywhere across Fort Worth, you have two proven ways to fix aluminum wiring:
Full rewiring: We replace the aluminum branch wiring with copper. This is the most complete fix.
Connector repair: We attach short copper wires at each connection, joined with CPSC-approved connectors.
Avoid standard wire nuts and quick fixes that aren’t approved for aluminum. They don’t meet the federal safety standard for this hazard. The CPSC guide to repairing aluminum wiring explains both approved methods.
We Check Every Connection and Plan the Work Before Walls Open
Ready to fix the wiring in your Fort Worth home? Here’s what we do before any work starts:
Confirm the wiring type in your walls.
Check your outlets and switches for loose or overheated connections.
Map each circuit so nothing gets missed.
Then we give you a clear scope of work and pull the city permit. No walls open until both are in place. You know exactly what’s changing in your home and why.
Inspection Records Help With Insurance and Resale
Selling, buying, or renewing insurance on a Fort Worth home? The paperwork from your wiring fix matters. When the work is done, you get:
A city inspection sign-off
Records of the work we completed
That proof answers questions from buyers and insurers before they come up.
Some insurers ask about aluminum wiring before they write a policy on an older home. Your records show the hazard was fixed.
We're There When You Need Us!
877-746-6855 
Frequently Asked Questions
It might, if your home was built from the mid-1960s to the mid-1970s. Look for “AL” or “ALUMINUM” printed on exposed cable, or book a visit and we’ll confirm.
The risk is at the connections, which can loosen, overheat, and start fires. Warm cover plates and flickering lights are signs to call right away.
Not always, since approved connector repairs are an option. Full rewiring is the most complete fix, and we’ll walk you through both.
Not usually, because thick aluminum service wires are common and normal. The concern is the smaller branch wiring that feeds your outlets and switches.
It can, since some insurers ask about it on older homes. Records from a permitted, inspected fix help answer those questions.
Call (817) 799-6090 for Home Rewiring Services in Fort Worth
Think your home might have aluminum wiring? Book a visit, and we’ll confirm what’s in your walls and explain your options.
We’ve been serving DFW since 1975. We answer calls 24/7, so reach out whenever you’re ready to schedule.
Berkeys Plumbing, A/C & Electrical in Frisco • 4645 Avon Ln Suite 260, Frisco, TX 75033 • 214-216-1727