Got a Generator? Whole House Surge Protector Installation in Fort Worth, TX Guards What It Can’t

You may have installed a standby generator at your Fort Worth home and assumed you’re fully protected. A generator and a surge protector do two different jobs.

Your generator replaces power when the grid goes down. A surge protector limits sudden spikes in voltage. Having one doesn’t give you the other.

Many Fort Worth families added generators after the February 2021 winter storm. Surge protection is the other half of that plan, and it keeps your appliances safe when power switches on and off.

Your Fort Worth family may have lost a TV and a garage door opener right after an outage ended. That timing isn’t a coincidence.

Nearby lightning can send a spike through your service line. So can the grid switching back on after an outage. Those surges reach your home whether you have a generator or not.

North Texas spring thunderstorms bring frequent lightning and short outages across Fort Worth. Each one is a chance for a surge to slip through.

You may notice electronics failing in your Oakhurst home with no storm in sight. Many surges start right inside the house.

Your AC compressor, pool pump, and the moment your transfer switch flips all create small spikes. One small spike won’t break anything. But over time, they wear down the circuit boards in your electronics and appliances.

Long Fort Worth summers mean your AC compressor starts many times a day. That adds up to a lot of small surges each year.

Your Fort Worth home office may run computers, a router, and a smart TV all day. Those devices need more than one layer of protection.

• A whole-house protector at the panel handles large surges before they spread through your wiring.

• Plug-in surge strips guard sensitive electronics from the smaller spikes that get past.

• Coax and phone lines can carry surges too, so they may need protection.

Each layer catches what the other misses. Together, they give your electronics the best chance of riding out a surge.

You want your surge protector set up right alongside your generator at your Fort Worth home. Here’s how we install it:

1. We shut off the power.

2. We mount the protector at your electrical panel.

3. We check the grounding and bonding.

4. We confirm it works with your transfer switch.

5. We check the indicator lights to make sure it’s active.

Recent editions of the National Electrical Code require surge protection when a home’s electrical service is installed or replaced. The IAEI summary of NEC surge protection changes explains the rule.

Your Fossil Creek family wants your surge protector to keep working for years. A few simple habits help you know it’s still on the job.

• Check the indicator lights after storms. A light that’s off or changed color can mean the protector needs attention.

• Replace the protector after a major surge. A big hit can use up its protection.

• Keep your plug-in strips updated. Older strips wear out over time too.

• Test your generator and transfer switch on schedule. Your backup power and surge protection work best together.

Fort Worth storm season can put several hard hits on a protector in one spring. Quick checks keep you from guessing.

We’ve served North Texas for 50 years, since 1975. Our licensed, background-checked electricians mount your surge protector at the panel, check the grounding, and make sure it works with your backup power. Homeowners give us a 4.8-star Google rating.

Call (817) 799-6090 for Whole House Surge Protector Installation in Fort Worth.